Building Connection Cold Extrusion Rebar Coupler Joints High Tensile Strength

Cold extruded steel bar connector for building connection steel bar

product description:

The cold extrusion press connection technology is a connection technology with fewer threads and equal strength. And because of its good fatigue resistance, it is widely used in bridge construction.
The standard implemented by our cold extrusion press system is JGJ107-2010 <"General Technical Specification for Mechanical Splicing of Steel Bars".

main feature:

1. It can join steel bars with diameter from Ø16mm to 40mm
2. Place the two ends of the steel bar butt, making this solution suitable for tension and compression applications.
3. Will not reduce the cross-section of the steel bar.
4. Each sleeve has a separate mark to achieve full traceability.

advantage:

1. It can be used to connect steel bars with a diameter between 16mm and 40mm.
2 .Our standard coupler can be used to connect HRB335/400 steel bars.
3. Including two types: YJ650 and YJ800:
YJ650 can be used to connect 16mm-32mm steel bars;
YJ800 can be used to connect 36mm-40mm steel bars.
4. The steel bars embedded at both ends can be connected;
5. Due to the good fatigue resistance of the joint, it is very suitable for bridge construction;
6 .No flammable gas, not affected by rain or cold weather, easy to operate. It can save 80% of the connector steel consumption.
7. Will not reduce the cross-sectional area of ​​the steel bar.

High Tensile Strength Cold Extrusion Rebar Coupler

Building Connection Cold Extrusion Rebar Coupler

High Tensile Strength rebar joints

Building Connection Cold Extrusion Rebar Coupler Joints High Tensile Strength Images