Steel Rebar Cutter Portable Sheet Metal Cutting Machine Curved Iron Machine
Introduction:
steel bar cutting machine is suitable in most types of steel bars used in construction projects, such as ordinary carbon steel, hot rolling round steel, the spiral steel, the flat steel and the square steel as well. Both in the field of mechanism and building, this machine have broad applicability and most ideal equipment for steel products cutting.
Types
GQ40,GQ50 Steel Bar Cutter Machine features
1. Reinforcing bar cutter/Bender is designed to be efficient and accurate bar cutting / bending for modern construction site.
2. The machine can be fitted with rubber or cast iron wheels making machine movable at the site.
3. The electric model can be converted to diesel engine powered model.
GQ42D Steel Bar Cutter Machine features
1. GQ42D Adopts Gears , shafts, Connection rod and blades made of high quality alloyed steel with required heat treatment(quenching/tempering/high frequency)case to ensure reliable performances also under heavy loads and long working life
2. Connection rod had high hardness degree on attaching part with the blade ,its internal side is made of tin-bronze to avoid abrasions while touching the crankshaft
3. Thick and durable blades to ensure accurate cutting with all kinds of steel bar (square blade or moon-shape blade option)
GQ55D Steel Bar Cutter Machine features
1. The casing is made by ductile cast iron. And the inside gear ,gear shaft ,and connecting rod
Were made by high quality structural steel or alloy steel
2. The important parts of the machine under gone hardness treatment
3. The heavy fly wheel can ensure the strength of cutting . as well as deduce the impact load of the machine
4. The adoption of the large gear can improve the driven speed as well as the working life
5. The high cutting speed with simplified system enjoys 50% faster than normal cuters
6. The longitudinal direction hand/feet Operated way satisfies the human-machine engineer principle and enables a simple operation
| Certification: | RoHS, ISO 9001:2000, ISO 9001:2008, CE |
| Automation: | Automatic |
| Suitable for: | Carbon Steel, Stainless Steel |
Principle:
The motor power is driven by a pair of pulleys to drive the flywheel shaft, and after three stages of gear reduction, the eccentric shaft is driven by the sliding key clutch to realize the reciprocating motion of the power blade and the moving blade to cut the steel bar.
Features:
1.Small volume, good quality, compact structure, compact and reliable.
2.Good lubrication performance: the box-type sealing structure is adopted and the gear splash lubrication, the continuous operation can be used for more than one month.
3.Easy to move: front wheel steering, flexible and easy to maintain.
| product name | Rebar Cutting Machine |
| Origin | Chongqing, China |
| Type | GQ40, GQ42, GQ45, GQ50 |
| Color | as shown |
| Voltage | 380V/customized |
| Applicable industries | energy and mining, machinery repair shops, manufacturing plants, construction engineering, building materials stores |
| Model | Motor power | Motor speed | Cutting diameter | Voltage | Cutting times | Color | Weight | Dimension
(mm) |
| round bar | rebar |
| GQ40 | 3KW | 1440r/min | 6-32mm | 6-28mm | 110V/
220V/
380V/
415V/
customized | 32/min | red/
blue/
green/
as your prefer | 365kgs | 1330x500x450 |
| GQ40-B | 6-40mm | 6-32mm | 390kgs | 1400x500x460 |
| GQ45 | 6-40mm | 6-32mm | 390kgs | 1400x460x500 |
| GQ50 | 6-50mm | 6-40mm | 480kgs | 1450x500x550 |
Precautions for use:
1. After starting, run dry first, check that all transmission parts and bearings are running normally, then work.
2. When the machine does not reach the normal speed, do not cut the material. When cutting materials, use the middle and lower parts of the cutter, hold the steel bar and align the cutting edge quickly and put it in quickly. The operator should stand on the side of the fixed blade and press the steel bar forcefully to prevent the end of the steel bar from popping out and hurting people. It is strictly forbidden to hold the steel bar on both sides of the blade with two hands and leaning over to feed the material.
3.It is not allowed to cut steel bars whose diameter and strength exceed those specified on the mechanical nameplate and red-hot steel bars. When cutting multiple steel bars at one time, the total cross-sectional area should be within the specified range.
4.. When cutting low-alloy steel, a high-hardness cutter should be replaced, and the cutting diameter should conform to the mechanical nameplate.
Our company offers variety of products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic
globalization has developed with anirresistible force.
Q1: - Can i request customize service?
A: Yes, dear sir, we can also customize voltage, material, colour, nameplate etc., and meet your other special request.
Q2: - What is the advantage of your factory?
A: Here we're your "Chinese Partner", accurate market sharing, reliable investment suggestion, select right machine, quick problem solver, reliable after-sales service, minimize purchasing risk.
Q3: - What service do you supply after order?
A: Your order will be fully tracked including production, professional quality control, strong logistics teamwork working and experienced customs documents preparation, you can get One-stop service from us.
Q4: - How to solve the after-sales problem?
A: You can send us a video or pictures to explain the problem, later we can give you a solution to solve it, if it is our responsibility, we will 100% in charge of it and try our best to make you satisfied, we pursue long term cooperation always.
Product Tags:
|
|
Portable Sheet Metal Rebar Straightener Machine 380v Images
|
